真龙彩票开户

Saimo Tilt Switch and Controller

Tilt Switch Probe - Model PLR30(old model  SL20

When material rises to tilt the probe 15°or more from its vertical position, the internal steel ball rolls off center and its normally closed contacts will open. As material falls away from the probe body and the probe becomes upright, the ball returns to its original centered position, once again causing switch actuation with the contact closed. The change in the internal switch status is user accessible for signaling alarms or lights with the aim of safety protection.
tilt switch probe
Features
  • The SL20-30 tilt switch probe can be either used separately or incorporated with controller.
  • The controller is equipped with a 0~10s adjustable delay circuit, preventing the tilt switch from false tripping due to a short duration tilt.
  • Normal/alarm positions are set by jumper setting, by selecting the vertical or inclined position as its normal status.
  • Robust and features anti-corrosion construction
    Easy installation
  • PCB-fitted controller
  • All probes are equipped with mounting accessories.
Applications
  • Plugged chute and chute transition detection
  • Conveyor belt misalignment detection
  • Tripper discharge detection
  • No material detection of belt or vibrating feeder
Technical Specifications
  • Contact: Normally closed, non-mercury switch, 250mA/24 VDC, non-inductive load or 2amp 110/240 VAC rated switch
    0.8A at 240VAC/1.5A at 120VAC (optional)
  • Rated Temp.: -40℃ ~ +200℃
  • Enclosure: Cast Iron, nickel-chrome alloy plated; also available in Stainless Steel
  • Tilt angle: 15°
 
 
 

Tilt SWitch Controller - Model SL50

Saimo tilt switch controller is offered in two versions: PLR38(SL28)for metal construction and PLR39(SL29) for plastic construction. Both are protected to IP65, with large indicating lights located on the front panel.

A 0-10 second adjustable time delay circuit in the control unit prevents momentary tilting of the switch from causing a false or premature contact transfer.

A selectable jumper permits normal output condition for either vertical or tilted position of probe.

Two normally-open and two normally-closed output contacts are available for connection to external alarms and/or controls.
tilt switch controller
Technical Specifications
  • Power supply:110 or 220 VAC ± 10%,47 - 62 Hz,10W
  • Output:1 DPDT contact, rated at 5Amp/220VAC or 5 Amp/28VDC, non-inductive load
  • Delay time:0-10 seconds adjustable
  • Jumper:Allow to select vertical or inclined position as the normal status
  • Enclosure:ABS outdoor casing
 
 
 
 
 
 
CHINA HEAD OFFICE
  • P    +86-0516-87885888
  • F    +86-0516-87885858
  • E    zouli@age2age.net
  • A    No. 2 Luoshan Road, Development Zone
  •        Xuzhou, Jiangsu, China
99彩票网址多少 欢乐生肖官方网站 周易彩票开户 湖北快3 河北11选5 信彩彩票开户 纵购彩票开户 龙猫彩票开户 信彩彩票开户 众赢彩票投注